*Financing plans available.*
Total Tuition: $15,000
Total Tuition: $15,000
8-to-1 Student Teacher Ratio
Location: Branchburg, NJ
11 Months, Flexible Hybrid Schedule
Plumbing Training in New Jersey
Our Plumbing Training Program delivers the most comprehensive hands-on plumbing training in New Jersey, designed to help students start a successful career as a Plumber. This hybrid program combines online classroom learning with hands-on technical training, giving you real-world experience working with the same tools, materials, and systems used by professional plumbers in the field.
You’ll learn core plumbing skills across residential, commercial, and industrial systems. The curriculum is extensive, covering piping techniques, the National Standard Plumbing Code (NSPC) as adopted by New Jersey, and core principles from the International Plumbing Code (IPC) and building code standards used in the field. You will gain direct experience with residential and commercial rough-ins, fixture and appliance installation, drain and vent systems, troubleshooting, repair, and heating systems, including hot water, steam, and hydronics. Students work with copper, PVC, PEX, steel, and specialty piping materials while developing the practical skills employers look for.
This is a complete plumbing career program built to prepare you to graduate job-ready. Students graduate with a Plumbing Training Certificate, OSHA 10-Hour Construction Card, a professional tool bag, and the sponsored state-recognized training hours needed for long-term career advancement.
ACCREDITED & NJ APPROVED TRAINING
The Training Center is an approved plumbing education sponsor in New Jersey. This program fulfills the state’s training requirement and is the official first step toward a professional plumbing career in NJ, placing graduates on the required path from education to Apprentice to Journeyman to Licensed Master Plumber. The Training Center is also accredited by IACET (International Accreditors for Continuing Education and Training).
Comprehensive Plumbing Training
Unlike other trade schools that focus primarily on residential service, our plumbing training program covers the entire scope of the trade and is built to match the real-world demands of the industry. We prepare you for residential, commercial, and industrial environments, ensuring you are field-ready for all major areas of the New Jersey plumbing industry.
Residential Service Plumber
Develop diagnostic skills to troubleshoot leaks and install home systems. Service tankless water heaters and fixtures for a customer-focused career.
Commercial Plumber
Install large-scale systems in public facilities like hospitals. Master strict code requirements for high-volume water supply and backflow prevention.
Industrial Plumber
Prepare for manufacturing settings by learning process piping. Understand hazardous material handling and LOTO safety protocols for industrial plants.
Pipefitter
Build fabrication skills for high-pressure systems. Learn to interpret complex P&IDs and perform precise joining techniques for heavy-gauge alloy piping.
Steamfitter
Work on steam and hydronic heating systems for large facilities. Learn to install high-pressure boilers, pumps, and valves for critical infrastructure.
Maintenance Plumber
Perform preventative care like winterization and routine system auditing. Gain the inspection skills to stop costly failures in facility management roles.
Program Schedule & Class Details
This 11-month Plumbing Training Program consists of 96 classes, 58 of which are in-person at our Branchburg, NJ location. The program offers a flexible schedule and combines online learning with in-person hands-on training. In addition to building core plumbing skills, you will learn specialized fields like pipefitting, steamfitting, and hydronic heating, giving you the flexibility to work in any sector of the industry. The total cost is $15,000, with financing plans available starting as low as $190 per month. There are no hidden fees or added costs. Everything is included in the tuition cost, including all materials, tools, books, and 24/7 access to our online learning system.
Semester Starts
July 1, 2026
Plumbing Training Program Overview
Program Details:
- Program Length: 11 Months (40 Weeks)
- Format: Hybrid (Online + In-Person lab)
- Schedule: 2 Classes per week
- Class Breakdown: 96 Total Classes, consisting of:
- 58 In-Person Lab Sessions (4 Hours Each)
- 38 Online Classroom Sessions (3 Hours Each)
- Student-to-Teacher Ratio: 8:1
- Total Training Hours: 346 Hours
- Location: Branchburg, NJ campus
Tuition & What’s Included:
- Total Tuition Cost: $15,000
- This cost includes tools, books, training materials, certification, and exam prep for CSST Gas Piping and Backflow Tester.
- Every student receives a personal tool bag with high-quality professional plumbing tools, included in the tuition cost
- Flexible financing plans are available
Credentials Earned Upon Graduation
This program equips students with the industry recognized credentials needed to begin a successful career in plumbing. You will earn:
- Plumbing Training Certificate of Completion (with official transcript)
- NJ State Board Approved Educational Hours
- OSHA 30-Hour Construction Card
- Exam preparation and certification for CSST Gas Piping and Backflow Tester.
Full Schedule for TBD Semester (Branchburg, NJ)
Schedule Coming Soon
Class Format & Training Hours
Our Plumbing Training Program includes a total of 346 hours, divided between classroom and hands-on lab sessions. Below is the breakdown of hours:
- Online Classroom: 114 Hours
- In-Person Lab: 232 Hours
- Program Total: 346 Hours
Plumbing Training Location
The Training Center provides plumbing training in New Jersey at our Branchburg location. This campus features a 3-zone, professional-grade plumbing lab with 8 dedicated training stations that mirror real-world environments.
Visit our location page to explore our school and schedule a visit; our instructors are always happy to show you around.
- View Branchburg, NJ Campus – View Location
Worried about tuition?
Financing Plans Are Now Available
Plumbing Program Benefits
Plumbing Training Curriculum
Our plumbing training program includes a comprehensive curriculum of 16 core modules, designed to build the essential skills needed to start a plumbing career in New Jersey. The course covers the complete scope of residential and commercial systems, including plumbing code compliance, rough-in installation, water distribution, drainage, and fixture setting.
Introduction to Plumbing
We start with the past, present, and future of the industry. Students learn core plumbing terminology and the theory behind potable water versus sanitary waste systems. We also cover how Artificial Intelligence (AI) is revolutionizing the trade, preparing you for the next generation of smart plumbing technology.
Job Site Safety & OSHA-10
Safety is your first responsibility on any job site. This module covers OSHA-10 standards, including Personal Protective Equipment (PPE), confined space entry, and excavation & trenching safety. You will also learn Hazard Communication (HazCom) and Lockout/Tagout (LOTO) procedures to prevent injury when servicing energized plumbing equipment.
Plumbing Tools, Materials & Regulations
Gain expertise in the hardware of the trade. You will learn to identify and handle professional tools including press fitting machines, threading machines, torches, and pneumatic tools. We also study the legal applications of every plumbing pipe, fitting, and valve allowed by code, alongside the administrative regulations required for compliant plumbing projects.
Plumbing Math & Formulas
Plumbing math is the language of precision. This module strips away the fear of math and focuses on real-world applications: calculating rolling offsets (including 22½° and 45° elbows), measuring pipe grade for drainage, and computing Drainage Fixture Units (DFU) to size plumbing waste and vent systems correctly
Pipe Joining & Fabrication
This is a major hands-on component of your training. You will master the techniques to connect every major piping system, including soldering copper, gluing PVC/ABS, and using modern Copper Press and Push fittings. We cover distinct PEX applications, including both PEX-A expansion and PEX-B crimping, as well as joining methods for no-hub cast iron, ductile iron, and CSST gas piping.
Water Supply & Backflow Prevention
Learn how to distribute clean, potable water through diverse systems, including municipal distribution, private well water, and purification systems. This module covers the installation of water heaters, mixing valves, and Anti-Scald valves. We also emphasize public health protection through Backflow Prevention, instructing you on the proper use of vacuum breakers, check valves, and RPZ devices, alongside ASHRAE 188 standards for managing Legionella bacteria.
Drainage, Waste & Vent (DWV) Systems
The “sanitary” side of plumbing. Students learn the physics of removing wastewater safely. Topics include installing P-traps to block sewer gas, sizing plumbing vent stacks to protect trap seals, and understanding the flow of waste in both residential and commercial plumbing layouts.
Storm Water & Sewer Management
Distinct from sanitary waste, storm water requires specific plumbing management. You will learn to calculate rainfall rates, size storm drainage systems for roofs and parking lots, and identify various storm water drain types. The module also explains why modern code mandates the separation of sanitary and storm piping, alongside environmental standards for discharging wastewater from plumbing systems.
Natural Gas & Propane Systems
Gas plumbing requires high-level precision. This module teaches the threading and installation of black iron pipe for Natural Gas (NG) and Propane (LPG). Students learn to size fuel gas piping using both BTU and MBH load charts, applying proper sealants to ensure leak-free, code-compliant gas delivery.
Plumbing Electrical Controls & Pumps
Modern plumbing requires electrical knowledge. This unit covers low-voltage controls, float switches, and alarm wiring for sump pumps, sewage ejectors, and lift stations. You will learn basic circuit safety and troubleshooting for staged plumbing equipment.
Hydronic Heating & Boilers
An introduction to heating systems. Students examine how boilers generate heat (via steam or hot water) and distribute it through residential heating piping networks. You will learn the applications for radiators, baseboards, and radiant floor heating systems.
Hangers, Supports, Pipe Insulation & Firestopping
This module covers the proper spacing and installation of hangers to secure plumbing pipes, as well as insulation techniques for thermal efficiency. Students will learn to identify suspect materials, including asbestos, and follow the mandatory safety protocols for reporting and isolating hazards to ensure job site safety.. We also cover Firestopping, the code requirement for sealing penetrations in fire-rated walls to prevent the spread of smoke and flame.
Specialty Piping, Indirect Waste & System Testing
Develop advanced skills for the critical systems found in commercial, industrial, and healthcare settings. This module covers “Indirect Waste” piping protocols required for food handling and sterile environments to prevent cross-contamination. You will learn the life-safety installation standards for Emergency Eyewash and Shower Stations (ANSI/ISEA Z358.1) mandated by OSHA. Finally, we cover the rigorous NSPC requirements for testing new installations, teaching you how to perform hydrostatic, air pressure, and smoke tests to ensure every system is leak-free and inspection-ready.
Blueprint Reading, Drafting & Fixture Installation
From rough-in to finish. Students learn to interpret plumbing blueprints, draft isometric sketches, and use symbols to plan a job effectively. The module transitions to “trim work,” teaching the proper installation of toilets, sinks, faucets, and shower valves to complete a plumbing installation.
Plumbing Codes & Regulations
Compliance is the backbone of the trade. This comprehensive module anchors your training in the New Jersey Uniform Construction Code (UCC) and 2024 National Standard Plumbing Code (NSPC), while reviewing the International Plumbing Code (IPC) for neighboring NY and PA markets. You will navigate critical regulatory frameworks including ADA accessibility, NJDEP environmental standards, and ASHRAE 188 for Legionella control. We also drill down into OSHA 29 CFR 1926 (Construction) safety standards and the recent 2024–2026 code updates, covering new mandates for tracer wire, vacuum testing, chemical waste piping, and protection from expansive soils.
Plumbing Career Pathways & Licenses
The roadmap to your plumbing license. We break down the exact steps to move from Plumber’s Helper to Apprentice, and finally to Journeyman and Licensed Master Plumber. You will leave understanding the state requirements and the business opportunities available to licensed plumbing professionals in New Jersey.
Why The Training Center
“Top notch facility, staff and education. Dan and his staff are super accommodating and treat everyone, regardless of background and experience, like a family.”
Bryan T
Bryan T
“The entire staff was great in giving you help in any way you needed it. Also, if you show that you are serious about this line of work, they would do anything possible to help you. The best.”
Damien Askew
Damien Askew
“This place is a hidden gem. From day one it has been a huge learning experience from the flexible scheduling for people working, to how you have everything you need from the online setup. Super informative and you actually really learn here.”
Marco Martinez
Marco Martinez
Our Difference
Trusted for over 40 years and recognized as a top trade school for Plumbing training. Learn what sets us apart.
Student Success
More than just a school, we’re lifelong partners in our students’ careers, and we’re proud to share their success.
Reviews
We put students first, and their success matters most. See what some of our students say about their experiences.
Accreditation
We are an accredited school, providing industry-recognized training approved by national and state authorities.
Top Plumbing Training School in NJ
At The Training Center, we have over 40 years of experience helping students build successful careers in the trades. Our plumbing school in New Jersey specializes in training programs designed for all experience levels, from beginners to seasoned professionals. Our approach focuses on flexible, quality, and affordable training to make learning more accessible. We provide top-rated plumbing training to students across the entire state of New Jersey, serving:
- Atlantic County, NJ
- Bergen County, NJ
- Burlington County, NJ
- Camden County, NJ
- Cape May County, NJ
- Cumberland County, NJ
- Essex County, NJ
- Gloucester County, NJ
- Hudson County, NJ
- Hunterdon County, NJ
- Mercer County, NJ
- Middlesex County, NJ
- Monmouth County, NJ
- Morris County, NJ
- Ocean County, NJ
- Passaic County, NJ
- Salem County, NJ
- Somerset County, NJ
- Sussex County, NJ
- Union County, NJ
- Warren County, NJ
Frequently Asked Questions (FAQs)
Is plumbing a good career choice in New Jersey?
Yes, the demand for plumbers in New Jersey is at an all-time high. With an aging workforce retiring, there is a shortage of skilled tradespeople, which drives up wages and job security. It is a recession-resistant career that offers high earning potential without the debt of a four-year college degree.
How do I become a licensed plumber in NJ?
To become a licensed plumber in New Jersey, you must combine approved education with field experience. The state requires you to complete 576 hours of Related Technical Instruction (RTI), typically 144 hours per year, while simultaneously accruing 8,000 hours of on-the-job training under a sponsoring Master Plumber. After fulfilling these requirements and working an additional year as a Journeyman, you qualify to take the Master Plumber license exam.
Is this plumbing program approved by the State of New Jersey?
Yes. This program is officially approved and delivered under a Continuing Education Sponsor (NJ Master Plumbers Board Sponsor #1234567890) registered with the New Jersey State Board of Examiners of Master Plumbers. This approval confirms that the curriculum meets state regulations and that the training hours earned count toward the education requirements for plumbing apprenticeship registration and long-term licensure in New Jersey.
Do I need to be good at math to be a plumber?
You need basic math skills, but you do not need to be a mathematician. Our program teaches you the specific “trade math” you actually need for the job, such as reading a tape measure, calculating pipe angles, and simple fractions. We break it down so it is easy to understand and apply.
How much does plumbing training cost?
The total tuition for the program is $15,000. This all-inclusive cost covers your books, training materials, certification exam fees, and a professional-grade tool bag that is yours to keep. We also offer flexible payment options to ensure the program remains accessible.
Do you offer payment plans or financing?
Yes, we are committed to making trade education affordable. We offer flexible payment plans starting as low as $190 per month. This allows you to pay for your training in manageable installments while you attend school.
How long is the program?
The program takes 11 months to complete. This accelerated timeline allows you to finish your training and enter the workforce as a skilled plumbing apprentice in less than a year.
Is the training hands-on or online?
It is both. The curriculum totals 346 hours, consisting of 114 hours of online classroom lessons and 232 hours of in-person hands-on training at our Branchburg plumbing lab. This structure gives you the flexibility to continue working while you learn
Does the plumbing program include job placement support?
We provide dedicated job placement support designed to help you get hired as an apprentice. This includes resume building, interview prep, and connecting you with hiring partners. We actively build relationships with plumbing and mechanical companies across New Jersey to help graduates secure employment in the trade.
What is the difference between a Plumber and a Pipefitter?
Our program covers both. Generally, a Plumber works on sanitary systems (water and waste) in homes and buildings, while a Pipefitter often works in industrial settings with high-pressure systems for steam, chemicals, or gas. Because our curriculum includes training on threading steel pipe, brazing, and reading commercial blueprints, you graduate with the skills to pursue apprenticeships in either path.
Start Your Boiler Career Today!
HAVE QUESTIONS?
Speak with a Real Person, We’re Here to Help!